Personalizing your phone
Setting the LED indicator
You want the attention LED to inform you of any phone incidents.
You can activate or deactivate the following settings:
•
In
Service: The phone is switched on.
•
Incoming call
•
Info
•
Appointment
call: Function can only be set with a function code, see Chapter
Procedures", page 90)
•
Hands-free operation
•
Battery empty
Settings
LED indications
<LED setting>
Setting the volume
All the ring tone properties are set using the profiles, see Chapter
tings", page 73.
Setting the volume during a call
You want to adjust the volume while in a call. You have to set the volume of handset
and loudspeaker separately.
The new volume will remain stored even after the call is ended.
72
Press the navigation key to the right or the
Scroll to
Settings
and press the
Scroll to
LED indications
Scroll to the LED setting you want and confirm with the
Louder: Press top side key.
Quieter: Press bottom side key.
Menu
Select
softkey.
and press the
Select
softkey.
"*/#
softkey.
Select
softkey.
"Profile set-
eud-1292/1.1 – R1.0 – 09.2011