Using the display and operating elements
abc-->123
Switching between upper and lower case
You want to switch between upper and lower case while making an input in text
mode.
Upper-case input is automatically activated when the first letter is entered. The text
mode then automatically switches to lower-case input. You can use the Softkey to
switch manually between upper-case and lower-case input.
a-->A
Correcting your input
You notice you have entered a wrong digit or character. You can either delete the
input one character at a time or cancel the entire input.
Moving the Cursor
You want to go to a certain character for an input or correction.
With the navigation key you can move the cursor to the left or right.
24
Switching between number mode and letter mode during your input:
Press the
abc-->123
or
123-->abc
Switching between upper case and lower case in text mode:
Press the
a-->A
or
A-->a
To delete the last character:
Press the Correction key of the
Exit editor without changes:
Press the End key.
Move the cursor with the horizontal navigation key.
softkey.
softkey.
Delete
softkey.
eud-1292/1.1 – R1.0 – 09.2011