Alarm
Locking the alarm settings
You want to protect the alarm settings against unauthorized or unintentional
changes.
You can define and activate an Admin PIN (see chapter
"Changing the Admin
PIN",
page 79). This means that, if the valid Admin PIN is not entered, you can only view the
alarm settings and not modify them. As long as you have not defined the Admin PIN
all alarm settings are freely accessible, without a PIN prompt.
For your safety
Range alarm
The phone can only send the alarm messages if it is within the radio area. So it is
important to activate the
Range alarm
so that you are notified acoustically by the
phone if you are about to leave the radio area (see chapter
"Activating range alarm
and system busy
beep", page 68).
Battery alarm
For safety reasons make sure that the batteries are always loaded (see chapter
"Charging the
battery", page 109).
When the alarm server mode is activated, an alarm is triggered as soon as the battery
is below 20 %. This function is only available in alarm serve mode.
104
eud-1292/1.1 – R1.0 – 09.2011