Configuring The No-Movement, Man-Down And Escape Alarm - Aastra 415 User Manual

Alarm
Configuring the no-movement, man-down and
escape alarm

Configuring the no-movement, man-down and escape alarm

You want to activate/deactivate the man-down, no-movement or escape alarm.
You can activate/deactivate the man-down, no-movement or escape alarm independ-
ently of each other and set the
the no-movement, man-down and escape
Settings
Sensor alarm
Man-down alarm
No-movement alarm
Escape alarm
100
Detection duration
Press the navigation key to the right or the
Scroll to Settings and press the
Scroll to Sensor alarm and press the
Activating/deactivating man-down alarm:
1. Scroll to Man-down alarm
2. Scroll to Enable and press the
3. Scroll to Detection duration
ation may occur until the pre-alarm is triggered.
➔
Alarm is activated/deactivated.
Activating/deactivating no-movement alarm:
1. Scroll to No-movement alarm
2. Scroll to Enable and press the
3. Scroll to Detection duration
ation may occur until the pre-alarm is triggered.
4. Scroll to Sensitivity and press the
5. Select the sensitivity level and press the
➔
Alarm is activated/deactivated.
Activating/deactivating escape alarm:
1. Scroll to Escape alarm
2. Scroll to Enable and press the
3. Scroll to Detection duration
ation may occur until the pre-alarm is triggered.
4. Scroll to Sensitivity and press the
5. Select the sensitivity level and press the
➔
Alarm is activated/deactivated.
and Sensitivity
alarm", page 96).
Menu
Select softkey.
Select softkey.
and press the Select
Select softkey.
and set the duration for how long an alarm situ-
and press the Select
Select softkey.
and set the duration for how long an alarm situ-
Select softkey.
Select
and press the Select softkey.
Select softkey.
and set the duration for how long an alarm situ-
Select softkey.
Select
(see chapter "Using
softkey.
softkey.
softkey.
softkey.
softkey.
eud-1292/1.1 – R1.0 – 09.2011