Alarm
Setting the alarm signalling
You want to adapt the way in which your phone signals pre-alarms and alarms.
When the phone triggers an alarm, a pre-alarm sounds locally on the phone, after that
the phone sends an alarm message to the alarm system. The alarm is then subse-
quently processed by the alarm system. The alarm system can be set up so that the
alarms are also signalled on the phone.
You can add the vibracall to the pre-alarm melody.
Setting the pre-alarm signalling
The phone provides a selection of pre-alarm melodies.
Settings
Sensor alarm
Alarm melody
Vibracall
Setting the server alarm signalling
When the server alarms are activated in the system, you can select from the alarm sig-
nalling as follows: Vibracall,
ting the server
alarm", page 69).
Note:
Your settings for Vibra call and Suppress ring tone can be overruled by the alarm
server.
102
Press the navigation key to the right or the
Scroll to
Settings
and press the
Scroll to
Sensor alarm
and press the
Selecting the pre-alarm melody:
1. Scroll to
Alarm melody
2. Scroll to the setting you want and confirm your choice of setting with the
Select
softkey.
➔
The setting is stored.
Note:
To listen to all the melodies use the Test softkey.
Selecting the vibracall:
Scroll to
Vibracall
and press the
➔
The setting is stored.
Progressive ring
Menu
softkey.
Select
softkey.
Select
softkey.
and press the
Select
softkey.
Select
softkey.
tone,
Suppress ring tone
(see chapter
"Set-
eud-1292/1.1 – R1.0 – 09.2011