Dialling and phoning
Using a headset
To make a phone call with the headset.
If you answer a call in headset mode using the Call key or Loudspeaker key, the call is
provided on the headset.
Note:
If you loose the radio contact with a Bluetooth headset, you can go back into the
radio area without being disconnected from the active connection.
Headset
<-->
Handset
20
Your phone is ringing. To answer the call, proceed as follows:
Press the Call key or Loudspeaker key.
➔
The call is provided on your headset.
Press the Loudspeaker key.
➔
The phone's microphone is switched on and the headset microphone is
switched off.
You can use the
Headset
Ending a call:
Press the End key.
Notes:
• To find out how to activate the headset, refer to the Chapter
headset
mode", page 75.
• To find out how to connect a Bluetooth headset, refer to Chapter
Bluetooth mode and Bluetooth
• To call a user, dial the user's phone number and press the Call key or Loud-
speaker key.
• For more information refer to your headset's user's guide.
or
Handset
softkey to switch modes.
devices", page 75.
"To activate
"Activating
eud-1292/1.1 – R1.0 – 09.2011