Starting An Hp Web Browser Interface Session With The Switch; Using A Standalone Web Browser In A Pc Or Unix Workstation - HP ProCurve series 2500 Management And Configuration Manual

Starting an HP Web Browser Interface
Session with the Switch
You can start a web browser session in the following ways:
Using a standalone web browser on a network connection from a PC or
I
UNIX workstation:
• Directly connected to your network
• Connected through remote access to your network
Using a management station running HP TopTools for Hubs & Switches
I
on your network
Using a Standalone Web Browser in a PC or UNIX
Workstation
This procedure assumes that you have a supported web browser (page 4-4)
installed on your PC or workstation, and that an IP address has been config-
ured on the switch. (For more on assigning an IP address, refer to "IP
Configuration" on page 5-3.)
1. Make sure the Java
not, do one of the following:
In Netscape 4.03, click on Edit, Preferences..., Advanced, then select
•
Enable Java and Enable JavaScript options.
• In Microsoft Internet Explorer 4.x, click on View, Internet Options,
Security, Custom, [Settings] and scroll to the Java Permissions. Then refer
to the online Help for specific information on enabling the Java
applets.
Using the HP Web Browser Interface

Starting an HP Web Browser Interface Session with the Switch

TM
applets are enabled for your browser. If they are
4-5