HP ProCurve series 2500 Management And Configuration Manual page 158

Procurve 2500 series
Hide thumbs Also See for HP ProCurve series 2500:
Table of Contents

Advertisement

Using Passwords, Port Security, and Authorized IP Managers To Protect Against Unauthorized Access
Configuring and Monitoring Port Security
Specifying Authorized Devices and Intrusion Responses. This exam-
ple configures port 1 to automatically accept the first device (MAC address)
it detects as the only authorized device for that port. (The default device limit
is 1.) It also configures the port to send an alarm to a network management
station and disable itself if an intruder is detected on the port.
HP2512(config)# port-security 1 learn-mode static
The next example does the same as the preceding example, except that it
specifies a MAC address of 0c0090-123456 as the authorized device instead of
allowing the port to automatically assign the first device it detects as an
authorized device.
HP2512(config)# port-security 1 learn-mode static
This example configures port 5 to:
I
I
HP2512(config)# port-security 5 learn-mode static
If you manually configure authorized devices (MAC addresses) and/or an
alarm action on a port, those settings remain unless you either manually
change them or the switch is reset to its factory-default configuration. You can
"turn off" authorized devices on a port by configuring the port to continuous
Learn Mode, but subsequently reconfiguring the port to static Learn Mode
restores those authorized devices.
Adding an Authorized Device to a Port. To simply add a device (MAC
address) to a port's existing Authorized Addresses list, enter the port number
with the mac-address parameter and the device's MAC address. This assumes
that Learn Mode is set to static and the Authorized Addresses list is not full
(as determined by the current Address Limit value). For example, suppose
port 2 allows two authorized devices, but has only one device in its Authorized
Address list:
7-18
action send-disable
mac-address 0c0090-123456 action send-disable
Allow two MAC addresses, 00c100-7fec00 and 0060b0-889e00, as the
authorized devices
Send an alarm to a management station if an intruder is detected on the
port
address-limit 2 mac-address 00c100-7fec00 0060b0-
889e00 action send-alarm

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 2512Procurve 2524

Table of Contents