HP ProCurve series 2500 Management And Configuration Manual page 282

Configuring Advanced Features
GVRP
Displaying the Static and Dynamic VLANs Active on the Switch. The
show vlans command lists all VLANs present in the switch.
Syntax:
For example, in the following illustration, switch "A" has one static VLAN (the
default VLAN), with GVRP enabled and port 1 configured to Learn for
Unknown VLANs. Switch "B" has GVRP enabled and has three static VLANs:
the default VLAN, VLAN-222, and VLAN-333. In this scenario, switch B will
dynamically join VLAN-222 and VLAN-333:
The show vlans command lists the dynamic (and static) VLANs in switch "B".
Figure 9-64. Example of Listing Showing Dynamic VLANs
9-88
show vlans
Switch "A"
GVRP enabled.
3 Static VLANs:
– DEFAULT_VLAN
– VLAN-222
– VLAN-33
Switch "B"
GVRP enabled.
1 Static VLANs:
– DEFAULT_VLAN
Dynamic VLANs
Learned from
Switch "A"
through Port 1