HP ProCurve series 2500 Management And Configuration Manual page 104

Configuring IP Addressing, Interface Access, and System Information
Interface Access: Console/Serial Link, Web, and Inbound Telnet
Figure 5-6. Example of Executing the Console Command with Multiple Parameters
You can also execute a series of console commands and then save the
configuration and boot the switch. For example:
Configure
the
individual
parameters.
Save the
changes.
Boot the
switch.
Figure 5-7. Example of Executing a Series of Console Commands
5-20
The switch implements the Event Log change immediately. The switch implements
the other console changes after executing
write memory reload
and .