Cli Access For Mac Address Views And Searches - HP ProCurve series 2500 Management And Configuration Manual

Monitoring and Analyzing Switch Operation
Status and Counters Data
2.

CLI Access for MAC Address Views and Searches

Syntax:
To List All Learned MAC Addresses on the Switch, with The Port
Number on Which Each MAC Address Was Learned.
To List All Learned MAC Addresses on one or more ports, with Their
Corresponding Port Numbers.
address on ports 1 through 5 and port 7:
To List All Learned MAC Addresses on a VLAN, with Their Port
Numbers. This command lists the MAC addresses associated with the ports
for a given VLAN. For example:
N o t e
The Series 2500 switches have a Single Forwarding Database architecture.
This means the switches have only a single MAC address table, and not a
separate MAC address table per VLAN.
To Find the Port On Which the Switch Learned a Specific MAC
Address. For example, to find the port on which the switch learns a MAC
address of 0060b0-889e00:
10-14
Type the MAC address you want to locate and press [Enter]. The address is
highlighted if found. If the switch does not find the address, it leaves the
MAC address listing empty.
show mac-address
[vlan <vlan-id>]
[ethernet]<port-list>]
[<mac-addr>]
For example, to list the learned MAC