Accupoint Ii; Pc Card - Toshiba Portégé M100 User Manual

turn on.
Computer/printer
do not communicate
Printer error

AccuPoint II

Problem
On-screen pointer
does not respond to
AccuPoint II operation

PC card

Refer also to Chapter 8,
Hardware and system checklist
outlet. Make sure the outlet is supplying power by
plugging in an appliance.
Make sure the printer is turned on and is
online (ready to use).
Inspect the cable connecting the printer to the
computer for damage. Make sure it is securely
connected.
A parallel printer connects to the parallel port and a
serial printer to the serial port. Make sure the ports
are configured correctly.
Make sure your software is configured to recog-
nize the printer. Check your printer and software
documentation.
Check your printer documentation.
If problems persist, contact your dealer.
Procedure
If a PS/2 mouse is connected, check the HW
Setup window. The Pointing Device option
should be set to Simultaneous to use both the
AccuPoint II and an external PS/2 mouse.
If problems persist, contact your dealer.
Optional Devices.
9-15