Disconnecting Lan Cable - Toshiba Portégé M100 User Manual

1. Turn off the power to the computer and to all external devices connected to
the computer.
2. Plug one end of the cable into the LAN's jack. Press gently until you hear the
latch click into place.
3. Plug the other end of the cable into a LAN hub connector. Check with your
LAN administrator before connecting to a hub.

Disconnecting LAN cable

To disconnect the LAN cable, follow the steps below.
CAUTION: Make sure the LAN Active indicator (yellow LED) is out
before you disconnect the computer from the LAN.
1. Pinch the lever on the connector in the computer's LAN jack and pull out the
connector.
2. Disconnect the cable from the LAN hub in the same manner. Check with your
LAN administrator before disconnecting from the hub.
2. Do not connect any other cable to the LAN's jack
except the LAN cable. Otherwise, malfunctions or
damage may occur.
3. Do not connect any power supplying device to the
LAN cable that is connected to the LAN's jack.
Otherwise, malfunctions or damage may occur.
Figure 4-13 Connecting the LAN cable
LAN
4-19