Slim Select Bay 2Nd Battery Pack; Installing; Removing - Toshiba Portégé M100 User Manual

User's Manual

Slim Select Bay 2nd battery pack

You can install a secondary battery pack in the computer's Slim Select Bay. The
battery comes with an adaptor. For details on using the adaptor, follow the steps
below. For details on installing modules in the Slim Select Bay, refer to Chapter 4,
Operating Basics.

Installing

To install the secondary battery pack in the adaptor, follow the steps below.
1. Fit the side of the secondary battery pack opposite the connector into the
adaptor.
2. Lay the battery into the adaptor. The latch should close automatically to
secure the secondary battery pack.
Figure 8-9 Installing the secondary battery pack in the adaptor

Removing

To remove the secondary battery from the adaptor, follow the steps below.
1. Slide the latch in the direction of the arrow shown below.
2. Push the secondary battery pack up from the bottom and lift it out.
8-12