Toshiba Portégé M100 User Manual page 149

2. The following menu will be displayed with the following icons: Built-in HDD,
Select Bay HDD, CD-ROM, FDD, Network (LAN), PC (ATA) card boot.
NOTE: A bar will appear only under the selected device.
3. Use the left/right cursor keys to highlight the boot device you want and press
Enter.
NOTES: 1. If a supervisor password is set, the menu above does not
appear when you use the user password to start the
computer.
2. In this computer, CD-ROM refers to the DVD-ROM or CD-
RW/DVD-ROM drives.
3. The selection method above does not change the boot
priority settings in HW Setup.
4. If you press a key other than one of those above or if the
selected device is not installed, the system will boot according
to the current setting in HW Setup.
HDD Priority Options
If more than one HDD is installed in the computer, this option lets you set the
priority for HDD detection. If the first detected HDD has a boot command, the
system will boot from the HDD.
Built-in HDD −> −> −> 2nd HDD −> −> −>
−> −> Built-in HDD −> −> −>
2nd HDD −>
−> −> PC Card −> −> −>
Built-in HDD −>
−> −> PC Card The computer will look for the −> −>
(Default) Built-in HDD first, next the 2nd HDD
and then the PC Card (Default).
−> −> PC Card The computer will look for the 2nd −> −>
HDD first, next the Built-in HDD and
then the PC Card.
−> −> 2nd HDD The computer will look for the Built- −> −>
in HDD first, next PC Card and then
the 2nd HDD.
HW Setup
7-5