Removing The Hdd Pack - Toshiba Portégé M100 User Manual

User's Manual

Removing the HDD pack

To remove the HDD pack, follow the steps below and refer to figures 8-11 and 8-12.
1. Set the computer to boot mode and turn off the power.
2. Disconnect the AC adaptor and all external cables connected to the computer.
3. Turn the computer upside down and remove the battery pack (refer to Chapter
6, Power and Power-Up
4. Remove two screws securing the HDD pack cover.
5. A small row of ridges mark latches securing the cover. Press on these ridges
until you hear a click.
6. Press on the arrows and lift the cover up and out to remove it.
Figure 8-11 Removing the HDD pack cover
7. Pull out the HDD's plastic tab and pull it straight out to remove the HDD pack.
HDD
PACK
8-14
Modes.)
Figure 8-12 Removing the HDD pack
S
CREWS
HDD
PACK COVER
P
LASTIC TAB