Connecting The Ac Adaptor - Toshiba Portégé M100 User Manual

User's Manual

Connecting the AC adaptor

Attach the AC adaptor when you need to charge the battery or you want to operate
from AC power. It is also the fastest way to get started, because the Battery Pack
will need to be charged before you can operate from battery power.
The AC adaptor can be connected to any power source supplying from 100 to 240
volts and 50 or 60 hertz. For details on using the AC adaptor to charge the Battery
Pack, refer to Chapter 6,
WARNING: Use only the AC adaptor supplied as an accessory. Other
AC adaptors have different voltage and terminal polarities and use of
them may produce heat and smoke or even result in fine or rupture.
CAUTIONS:
3-6
Power and Power-Up
1. Use only the AC adaptor supplied with your
computer or an equivalent adaptor that is compat
ible. Use of any incompatible adaptor could dam
age your computer. TOSHIBA assumes no liability
for any damage caused by use of an incompatible
adaptor.
2. When you connect the AC adaptor to
the computer, always follow the steps in the exact
order as described in the User's Manual.
Connecting the power cable to a live electrical
outlet should be the last step otherwise the
adaptor DC output plug could hold an electrical
change and cause an electrical shock or minor
bodily injury when touched. As a general safety
precaution, avoid touching any metal parts.
Modes.