User's Manual
NO CARRIER
Character display
becomes garbled
during a
communication
You cannot receive
an incoming call
Standby/Hibernation
Problem
The system will
not enter
Standby/Hibernation
9-20
You can also use the AT\N command. Refer to
the online help files for Appendix C,
mands
.
In data transmission, make sure the parity bit
and stop bit settings correspond with those
of the remote computer.
Check the flow control and communication
protocol.
Check the rings before auto answer setting in
your communications application.
You can also use the ATS0 command. Refer to
the online help files for Appendix D,
If problems persist, contact your dealer.
Procedure
Is Windows Media™ Player open? The system
might not enter Standby/Hibernation, if Windows
Media Player is either playing a selection or
finished playing a selection. Close Windows
Media Player before you select Standby/Hiberna-
tion.
If problems persist, contact your dealer.
AT Com-
S-registers
.