Connecting Other External Devices
1
Click Start, Turn Off Computer, then select Turn Off.
The operating system shuts off the computer.
2
Attach the PS/2 mouse cable to the PS/2 port on the
computer.
3
Refer to your mouse documentation for configuration
information.
To use both the PS/2 mouse and the AccuPoint II, set this up
when you have loaded the operating system.
Using a PS/2 mouse simultaneously with AccuPoint II
When you connect a PS/2-compatible mouse to the PS/2 port,
you may use the mouse, the AccuPoint II, or both.
NOTE
1
Click Start, Control Panel, then Printers and Other
Hardware.
2
Click the Toshiba HWSetup icon.
3
Select the Pointing Devices tab.
4
Under Pointing Devices Options, select one:
HINT: Using an optional Y-cable allows you to connect a
PS/2 mouse and a PS/2 keyboard to the PS/2 port
simultaneously.
When connecting any PS/2 device, turn off your computer to
prevent any possible hardware damage.
If you connect a PS/2 mouse to the computer while it is in
Standby mode, you will not be able to use the mouse when
you turn the computer on.
57