Toshiba Portégé M100 User Manual page 148

User's Manual
HDD −> −> CD-ROM−> −> −> −> −> −> −> −> LAN−>
−> −> −> −>
FDD −> −> CD-ROM−> −> −> −> LAN−>
−> LAN−> −> −> −> −> HDD −> −>
−> −>
CD-ROM−>
−> −> −> −>
−> LAN−> −> −> FDD −> −>
CD-ROM−>
You can override the settings and manually select a boot device by pressing one of
the following keys while the computer is booting:
U
Selects the USB diskette drive.
N
Selects the Network.
1 Selects the primary HDD.
2 Selects the secondary HDD.
P
Selects the PC card HDD.
C
Selects the CD-ROM*.
* In this computer, CD-ROM refers to the Slim Select Bay optical media
drive.
NOTES: 1. PC card HDD boot is supported only by slot 0 on the
computer. Support is guaranteed only for TOSHIBA PC
card HDDs.
2. When you assign a PC card HDD top priority, "PC" is not
displayed. However, the PC card HDD takes the position of
HDD in the Boot Priority Options list above.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
7-4
−> −> −> FDD −>
The computer looks for bootable files in
the following order: HDD, CD-ROM*, LAN
and diskette drive.
−> −>
−> −> HDD
The computer looks for bootable files in
the following order: diskette drive, CD-
ROM*, LAN and HDD.
−> −> FDD −>
−>
The computer looks for bootable files in
the following order: CD-ROM*, LAN,
HDD, diskette drive.
−> −>
−> −> HDD
The computer looks for bootable files in
the following order: CD-ROM*, LAN,
diskette drive and HDD.