Denso BHT-604BW User Manual page 144

BHT-604BW
8.
Press the ENT key or C key to return to the SET RF PARAMETER menu.
 Wireless Parameter Init
1.
S elect "3: INITIALIZE" at the SET RF PARAMETER menu and then
press the ENT key.
The screen displays
T o initiali ze wireless parameters:
U se the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1: Yes]
and then press the
Wireless parameters are initialized and the screen returns to the SET RF
PARAMETER menu.
To cancel:
U se the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2: No] and
then press the ENT key.
The screen returns to the SET RF PARAMETER menu.
 EAP Authentication Option Setting
This setting can be used when the mode is set to other th
menu.
1.
Press the SF key and dot key at the SET RF PARAMETER menu.
The screen displays as shown on the right.
[1: EAP START]: EAP authentication start time
[2: authPeriod]:
[3: helpPeriod]:
[4: startPeriod]:
[5: maxStart]:
2.
Use the cursor keys ([▲] [▼]) or numerical ke
highlight the item to be set and press the
T he mode changes to entry mode and the cursor displays.
3.
Enter each item with the numerical keys and press the ENT key.
To delete a single character, press the BS key.
Press the C key to delete all entries made.
4.
Press the C key to retu
130
ialization
as ho s wn on the right.
ENT key.
Retry interval when there is no response
Retry interval when authentication fails
Start retry interval
Start retry count
rn to the the SET RF PARAMETER menu.
an "1: None" at t
ys ([1] [2] [3] [4] [5]) to
ENT key.
he SET SECURITY MODE