Denso BHT-604BW User Manual page 141

2.
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1:
AUTH PARAM (EAP)] and then press the ENT key.
The screen displays as shown on the right.
[1: EAP TYPE]:
[2: IDENTITY]:
[3: ANONYMOUS ID]: Anonymous ID
[4: PASSWORD]:
[5: ROOT CERT]:
[6: CLIENT CERT]:
3.
Use the cursor keys ([▲] [▼]) or nume
E AP TYPE], and then use the cursor keys ([◄] [►]) to select PEAP or
EAP-TLS.
If PEAP is selected, a root certificate is used.
If EAP-TLS is selected, a root certificate and client certificate are used.
4.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2:
IDENTITY] and then pre
The mode changes to entry mode and the cursor displays.
5.
Use the numerical keys to enter an ID and press the ENT key.
P ress the SF and the BS key to change the entry mode (numerical entry (no guidance display) and
a lphabet entry).
T o delete a single character, press the BS key.
Press the C key to delete all entries made.
6.
Use the cursor keys ([▲] [▼]) or numerical key ([3]) to highlight [3: ANONYMOUS ID] and then
press the ENT key.
The mode changes to entry
7.
U se the numerical keys to enter an ID and press the ENT key.
Press the SF and the BS
alphabet entry).
To delete a single character, press the BS key.
Press the C key to delete all entries made.
Selects PEAP or EAP-TLS.
ID
Password
Root certificate
Client certificate
rical key ([1]) to highlight [1:
ss the ENT key.
mode and the cursor displays.
key to change the entry mode (numerical entry (no g
Barcode Handy Terminal
[▲] key / [▼] key
uidance display) and
127