Denso BHT-604BW User Manual page 130

BHT-604BW
 Wireless Network Parameter Settings
1.
Select "1: NETWORK PARAMETER" at the SET RF NETWOR
menu and then press the ENT key.
The screen displays as shown on the right.
[1 : SSID]: Displays the current Service Set ID.
Refer to "Chapter 5
details on the Se vi
2.
Ensure that [1: SSID] is highlighted and press the ENT
T he mode changes to entry mode and the cursor displays.
3.
Use the numerical keys and dot ke
Press the SF and the BS key to change the entry mode (numerical entry (no guidance display) and
alphabet entry).
To delete a single
Press the C key to delete all entries made.
4.
Enter the Service Set ID an
The entered Service Set ID is set.
5.
Press the C key t

Wireless Network Option Settings
1.
Select "2: RF OPTION" at the SET RF NETWORK menu and then
press the ENT key.
The screen displays as shown on the right.
The highlighted settings are t
[1: POWER SAVE]:
[2: RADIO MODE]:
2.
Use the cursor ke
the item to be set
3.
Use the cursor keys ([◄] [►]) to highlight each setting valu
4.
Press the ENT key or C key to return to the SET RF NETWORK menu.
Refer to "Chapter 5 Communication" – "5.3 Wireless Communication" for details of the above setting
items.
116
C ommunication" – "5.3 Wireles
r ce Set ID.
y to enter the Service Set ID.
character, press the BS key.
d press the ENT key.
o re turn to the SET RF NETWORK screen
he current settings.
Sets power saving mode.
Sets the wireless mode.
ys [▲ ▼
( ] [ ]) or numerical keys ([1] [2]) to highligh
.
K
s Communication" for
key.
.
t
e.