Denso BHT-604BW User Manual page 158

BHT-604BW
[2] Updating the CU-611 system
Update the CU-611 system after downloading the CU-611 system update file.
(Refer to section "4.2.2 CU-611 System Update" for details.)
1.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight
[2: CU-F/W MODIFY] and then press the ENT key.
The CU-F/W MODIFY menu screen displays as shown on th
[1: DO IT]:
Updates the CU-611 system.
[2: FILENAME]:
Displays the filename to be used for updating
Press the C key
2.
U se the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight
[1 : DO IT] and then press the ENT key.
The screen shown on the right displays and the CU-611 system is updated.
The screen displays as shown on the right up
Press the C key to return to the CU-F/W MODIFY

W hen the Displayed File Name Differs from the CU-611 System Up
If the name of the file displayed at [2: FILENAME] differs from the name of the CU-611 system update file
to be used for updating the system, enter the correct file name.
1.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2: FILENAME] and then press
the ENT key.
The mode changes to entry mode and the cursor displays.
2.
Use the numerical keys and dot key to enter the correct file name.
Press the SF and the BS key to change the entry mode (numerical entry (no guidance display) and
alphabet entry).
To delete a single character, press the BS key.
Press the C key to delete all entries made.
3.
Press the ENT key to set the entered file name.
144
to return to the SYSTEM PARAM
e right.
the CU-611 system.
ETER menu.
on completion of the update.
menu.
date File