Denso BHT-604BW User Manual page 132

BHT-604BW
 Wireless Security None Mode
WEP can be used with the Wireless security None mode.
To enable WEP, WEP and WEP KEY settings are required.
The first WEP KEY set
After setting the encryption key, the encryption key used is specified by
Refer to "Chapter 5 Communication" – "5.3
T RANSMIT KEY.
1.
Select "2: CONFIGURA
th en press the ENT key.
The screen displays as shown on the right.
: WEP OPTION]:
[1
[2 : WEP KEY1]:
[3: WEP KEY2]:
[4: WEP KEY3]:
[5: WEP KEY4]:
[6: TRANSMIT KEY]: TRANSMIT KEY settings
Press the C key to return to the SET SECURTIY menu
2.
U se the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1:
WEP OPTION], and then press the ENT
The screen displays as shown on the r
[1: WEP]:
[2: AUTHENTICATE]:
3.
P ress the ENT key or C key to return to the SET RF PARAMETER menu.
118
ting is the encryption key, which can be set from WEP KEY 1 t
Wireless Communication" for
TION" at th e SET SECURITY menu and
WEP option settings
WEP KEY 1 settings
WEP KEY 2 setting s
WEP KEY 3 settings
WEP KEY 4 settings
key.
ight.
Selects whe ther to enable or disable WEP.
The highlighte d setting is the current setting.
Selects open system settings or shared key
authentication.
Select shared key authentication.
The highlighted setting is the current setting.
o 4.
setting the TRANSMIT KEY.
details of the WEP KEY and