Denso BHT-604BW User Manual page 115

[9] PING test
Use the following procedure to run the PING test.
1.
Select "9: PING" at the TEST menu and then press the ENT key.
The TEST PING screen displays as shown on the right.
"1: RUN PING":
"2: SET PING":
"3: SET DEVICE":
Refer to the following section for details of the above items.
Press the C key to return to the TEST menu.
 "1: RUN PING" (PING Test Screen)
1.
Select "1: RUN PING" at the TEST PING menu and then press the
ENT key.
The current setting values display, and the BHT waits
c ount to be entered.
T o change the number of echo requests displayed, enter the desired value
using the numerical keys.
To delete a single character, press the BS key.
Press the C key to delete all entries made.
2.
Press the EN T k ey.
W he n the PIN G t est sta
on the right.
Press the C ke y to abort
Runs the PING test.
Displays the PING parameter setting screen.
Displays the PING device setting screen.
rts run ning , the message
the P ING test.
Barcode Handy Terminal
for the transmission
show n display s as show n
101