Denso BHT-604BW User Manual page 139

13.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highligh
WPA CIPHER] and then press the ENT key
The screen displa ys as shown on the right.
[1: CIPHER MODE]:
14.
Ensure that [1: C
TKIP or AES .
Select TKIP to use TKIP.
Select AES to use AES.
15 .
Press the ENT key or C key to return to the SET RF PARAMETER
menu.
 Wireless Security WPA-PSK Mode
PSK authentication an
1.
Select "2: CONFIGURATION" at the SET SECURIT
then press the ENT key.
The screen displays as shown on the right.
[1: AUTH PARAM (PSK)]: PSK authentication parameter setting
[2: WPA CIPHER]:
Pr ess the C key to return to the SET SECURITY menu.
2.
Use the cursor keys ([▲] [▼]) or numerical key
AUTH PARAM (PSK)] and then press the ENT key
Th e screen displays as shown on the right.
[1:PRE SHARED KEY]:
Selects TKIP or AES .
IPHER MODE] is highlighted and then select
d an encryption system can be used with wireless security WPA-PSK mode.
Encryption system s etting
Sets the shared key.
Barcode Handy Terminal
t [2:
.
Y menu and
([1]) to highlight [1:
.
125