Denso BHT-604BW User Manual page 143


W ireless Security WPA2-PSK Mode
PSK authentication and an encryption system can be used with wireless security WPA2-PSK mode.
1.
Select "2: CONFIGU
then press the ENT key.
The screen displays as shown on the right.
[1: AUTH PARAM (PSK)]: PSK authentication parameter setting
[2: WPA CIPHER]:
Press the C key to return to the SET SECURITY
2.
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1:
AUTH PARAM (PSK)] and then
The screen displays as shown on the right.
[1:PRE SHARED KEY]:
3.
Ensure that [1: PRE SHARED KEY] is highlighted and then press
the ENT key.
The mode changes to entry mode and the cursor display
4.
Use the numerical keys to enter a shared key and press the ENT
key.
Pr ess the SF and the BS key to change the entry mode (numerical entry
(no guidance display) and alphabet entry).
To delete a single character, press the BS key.
Press the C key to delete all entries made.
5.
Press the C key to return to the SET RF PARAMETER menu.
6.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2:
WPA CIPHER] and then press the ENT key.
The screen displays as sho
[1:CIPHER MODE]:
7.
Ensure that [1: CIPHER MODE] is highlighted and then select TKIP
or AES.
Select TKIP to use TKIP.
Select AES to use AES.
RATION" at the SET SECURITY menu and
Encryption system setting
menu.
press the ENT key.
Sets the shared key.
wn on the right.
Se lects TKIP or AES.
Barcode Handy Terminal
s.
129