Monitoring The Dst1-Mrd08Sl-1 - Omron NE1A-EDR01 Operation Manual

DST1 Series Monitoring
Instance ID: 341
Offset Bit 7
(bytes)
+0 Safety out-
put termi-
nal No. 7
monitor
+1 Reserved
4-7-3

Monitoring the DST1-MRD08SL-1

Safety input monitor
Safety input status
Safety output monitor
Safety output status
Overall status (See note 1.)
Safety input error cause
(See note 2.)
Safety output error cause
(See note 3.)
Note
Bit 6 Bit 5
Safety out- Safety out-
put termi- put termi-
nal No. 6 nal No. 5
monitor monitor
Monitor value: 1: ON, 0: OFF
Service code
Input value/ 0E hex
status
Error cause 0E hex
Error cause 0E hex
(1) Overall Status
Read Data Format (Read Size: 1 Byte)
+0
Status
Bit
0 Input Power Supply Voltage Monitor Flag
OFF: I/O power supply ON, ON: I/O power supply OFF
1 Output Power Supply Voltage Monitor Flag
OFF: I/O power supply ON, ON: I/O power supply OFF
2 Network Power Supply Voltage Monitor Error Flag
OFF: Normal (higher than monitor set value), ON: Error (not higher
than monitor set value)
3 Module Maintenance Flag
OFF: Within range (lower than monitor set value), ON: Out of range
(not lower than monitor set value)
4 Reserved
5 I/O Error Flag
OFF: Normal (all I/O points normal), ON: Error (one or more I/O points
abnormal)
6 Operation Time Monitor Error Flag
OFF: Within range (all I/O sets lower than monitor set value), ON: Out
of range (one or more I/O sets equal to or greater than monitor set
value)
7 Connected Device Maintenance Flag
OFF: Within range (all I/O points lower than monitor set value), ON:
Out of range (one or more I/O points equal to or greater than monitor
set value)
Bit 4 Bit 3
Safety out- Safety out-
put termi- put termi-
nal No. 4 nal No. 3
monitor monitor
Test output
terminal No.
3 status
Status value: 1: Normal, 0: Error
Class ID Instance ID
04 hex Refer to the table in
note 4.
3D hex 01 to 04 hex
04 hex 01 to 04 hex
Section 4-7
Bit 2 Bit 1
Safety out- Safety out-
put termi- put termi-
nal No. 2 nal No. 1
monitor monitor
Test output Test output
terminal No. terminal No.
2 status 1 status
Request data
(attribute ID)
03 hex
6E hex
6E hex
Status
Meaning
Bit 0
Safety out-
put termi-
nal No. 0
monitor
Test output
terminal No.
0 status
73