Ethernet/Ip-Devicenet Router; Accessing All Devices On A Network From A Network Configurator - Omron NE1A-EDR01 Operation Manual

EtherNet/IP-DeviceNet Router

1-1 EtherNet/IP-DeviceNet Router
1-1-1

Accessing All Devices on a Network from a Network Configurator

ED Router
(NE1A-EDR01)
2
The NE1A-EDR01 EtherNet/IP-DeviceNet Router is an FA router with one
Ethernet port and one DeviceNet port, and is used for routing messages
between Ethernet and DeviceNet Networks. In this manual the NE1A-EDR01
EtherNet/IP-DeviceNet Router is called the "ED Router."
Using an ED Router makes it possible to set devices, such as NE1A-series
Controllers and DST1-series Slaves, from a Network Configurator running on
a PC connected to an Ethernet or EtherNet/IP Network.
In addition, when multiple DeviceNet or DeviceNet Safety Networks are con-
figured for an Ethernet or EtherNet/IP connection using an ED Router, it is
possible to set devices such as NE1A-series Controllers and DST1-series
Slaves connected to another DeviceNet or DeviceNet Safety network from a
Network Configurator running on a PC connected to a DeviceNet or NE1A-
series USB port.
Ethernet (EtherNet/IP)
Network
Configurator
USB
DeviceNet Safety
DeviceNet Safety
DST1-series Slaves
Note (1) To access other networks, use the NE1A-SCPU01-V1 (unit version 2.0 or
later) or the NE1A-SCPU02 (unit version 2.0 or later) to connect the Net-
work Configurator.
(2) To access other networks, use Network Configurator version 2.0@ or
higher.
Network
Configurator
NE1A Safety Network
Controller
DeviceNet Safety
Section 1-1
Network
Configurator
DeviceNet Safety
DST1-series Slaves