Operating Examples; Overview; Settings - Omron NE1A-EDR01 Operation Manual

Operating Examples

4-3

Operating Examples

4-3-1

Overview

4-3-2

Settings

Mitsubishi Ethernet
Interface Module Settings
This section describes how to access a device on a DeviceNet or DeviceNet
Safety network from a general-purpose controller (e.g., a PLC or computer)
on an Ethernet network using UDP/IP frame message communications via an
ED Router.
In this example, a Mitsubishi CPU Module and a Mitsubishi Ethernet Interface
Module on an Ethernet network monitor an NE1A-series or DST1-series
device using UDP/IP message communications via an NE1A-EDR01 ED
Router.
Mitsubishi products
Power CPU
Supply Module
Module
Note The following Mitsubishi products are used in this example.
Module/Software
Power Supply Module
CPU Module
Ethernet Interface Module
Ladder Creation Software
Note For details on settings and programming, refer to 4-4 Mitsubishi Ethernet
Interface Module Settings and 4-5 Sample Ladder Programs. For advanced
monitor settings, refer to 4-6 NE1A Series Monitoring 4-7 DST1 Series Moni-
toring.
In this example, the following settings are made.
PC Parameter Settings (Refer to 4-4-1 PC Parameters.)
• I/O allocation settings
• Program settings
IP address: 192.168.250.18
Ethernet
Module
ED Router
NE1A Series
• NE1A-SCPU01-V1
• NE1A-SCPU02
DST1 Series
• DST1-ID12SL-1
• DST1-MD16SL-1
• DST1-MRD08SL-1
Q61P
Q02CPU
QJ71E71-100
GX Developer
Section 4-3
Ethernet Ethernet
IP address: 192.168.250.17
MAC ID: 17
DeviceNet Safety DeviceNet Safety
IP address: 192.168.250.17
MAC ID: 1
Model/Version
41