Ed Router Settings; Setting The Udp Port Address And The Address Displayed At The Ed Router - Omron NE1A-EDR01 Operation Manual

ED Router Settings

2-5

ED Router Settings

2-5-1 Setting the UDP Port Address and the Address Displayed at the
ED Router
1,2,3...
Use the Network Configurator to set the address displayed on the ED Router
7-segment display and to set the UDP port address.
■ Setting the Address Displayed at the ED Router
Select either the EtherNet/IP IP address or the DeviceNet node address as
the address to be displayed on the ED Router 7-segment display when the
status is normal.
■
Setting the UDP Port Address
Select a number from 1,024 to 65,535 for the UDP port to be used for device
access by UDP.
1. Select Programs - OMRON Network Configurator for DeviceNet Safety
- Network Configurator from the Start Menu. The Network Configurator
will be started.
2. Connect the Network Configurator online. (First set the interface with Op-
tion - Select Interface, and then select Network - Connect.)
3. In the Network Configuration Window, double-click the ED Router that is to
be set. The following dialog box will be displayed.
4. Set the address to be displayed at the ED Router, or set the UDP port ad-
dress.
• To set the address to be displayed at the ED Router, click 0001 Display
Mode and select Low byte of Ethernet IP address (EtherNet/IP IP ad-
dress) or DeviceNet MAC ID (DeviceNet node address).
• To set the UDP port address, click 0002 UDP Port No. and input a
number from 1,024 to 65,535.
5. After making the setting, click the OK Button.
6. In the Network Configuration Window, select the ED Router. Right-click
and select Parameter - Download. After the parameters have been down-
loaded, the ED Router will be automatically reset and it will then operate
using the new parameters.
Section 2-5
23