Monitoring The Dst1-Md16Sl-1 - Omron NE1A-EDR01 Operation Manual

DST1 Series Monitoring
Offset Bit 7
(bytes)
+2 Safety input
terminal No.
11 status
+3 Muting
lamp status
Instance ID: 340
Offset Bit 7
(bytes)
+0 Overall status
+1 Reserved
4-7-2

Monitoring the DST1-MD16SL-1

Safety input monitor
Safety input status
Safety output monitor
Safety output status
Overall status (See note 1.)
Safety input error cause
(See note 2.)
Safety output error cause
(See note 3.)
Note
Bit 6 Bit 5
Safety input Safety input
terminal No. terminal No.
10 status 9 status
Reserved
Monitor value: 1: ON, 0: OFF
Bit 6 Bit 5
For details on overall status, refer to 4-7-1 Monitoring the DST1-ID12SL-1.
Status value: 1: Normal, 0: Error
Service code
Input value/ 0E hex
status
Error cause 0E hex
Error cause 0E hex
(1) Overall Status
Read Data Format (Read Size: 1 Byte)
+0
Status
Bit
0 Input Power Supply Voltage Monitor Flag
OFF: I/O power supply ON, ON: I/O power supply OFF
1 Output Power Supply Voltage Monitor Flag
OFF: I/O power supply ON, ON: I/O power supply OFF
2 Network Power Supply Voltage Monitor Error Flag
OFF: Normal (higher than monitor set value), ON: Error (not higher
than monitor set value)
3 Module Maintenance Flag
OFF: Within range (lower than monitor set value), ON: Out of range
(not lower than monitor set value)
4 Reserved
5 I/O Error Flag
OFF: Normal (all I/O points normal), ON: Error (one or more I/O points
abnormal)
Bit 4 Bit 3
Safety input Safety input
terminal No. terminal No.
8 status 7 status
Test output
terminal No.
3 status
Status value: 1: Normal, 0: Error
Bit 4 Bit 3
Test output
terminal No.
3 status
Class ID Instance ID
04 hex Refer to the table in
note 4.
3D hex 01 to 08 hex
3B hex 01 to 08 hex
Section 4-7
Bit 2 Bit 1
Safety input Safety input
terminal No. terminal No.
6 status 5 status
Test output Test output
terminal No. terminal No.
2 status 1 status
Bit 2 Bit 1
Test output Test output
terminal No. terminal
2 status No. 1 status
Request data
(attribute ID)
03 hex
6E hex
6E hex
Status
Meaning
Bit 0
Safety input
terminal No.
4 status
Test output
terminal No.
0 status
Bit 0
Test output
terminal
No. 0 status
69