Table of Contents
Advertisement
Setting the recording time for a telephone
message__________________________________________
You can set the recording time for each telephone message.
Follow the procedure below to set the recording time for each telephone message.
1
Press [Function].
Press [Registration].
2
Press [Start/Copy].
3
Use [ 1] or [ 2] to select TAM SETTINGS.
Press [Start/Copy] twice.
4
Use [ 1] or [ 2] to select the recording time.
The recording time can be set to 0, 30, 60 or 120
seconds.
Press [Start/Copy].
5
Press [Stop].
Setting ends and the fax returns to standby mode.
n
When the recording time is set to 0, the alternative outgoing message is played. If an alternative
outgoing message has not been recorded, the outgoing message is played. In this case, there will be no
beep after the message is played and the caller will not be able to leave a message.
8-4
Function
DATA REGSTRATION
Registration
USER SETTINGS
TAM SETTINGS
MESSAGE LENGTH
Ex:
Ex:
PASSWORD
30 SECONDS
60 SECONDS
Advertisement
Table of Contents
