Table of Contents
Advertisement
REPORT SETTINGS
For details on accessing the settings below, see p. 9-2.
Name
TX REPORT
PRINT WITH IMAGE
RX REPORT
ACTIVITY REPORT
AUTO PRINT
TX SETTINGS
For details on accessing the settings below, see p. 9-2.
Name
ECM TX
MID PAUSE SET
AUTO REDIAL
REDIAL TIMES
REDIAL INTERVAL
TIME OUT
*
4 seconds (1 to 15) in the UK and (4 to 11) in Hong Kong.
** Up to 2 times in Australia, 3 times in Hong Kong, 5 times in New Zealand, 15 times in Malaysia.
***Minimum interval is 2 minutes in Singapore.
9-4
Description
Enable/disable automatic printing of the transmission report.
OUTPUT YES: Set the fax to print an activity report every
ti m e you send a document.
PRINT ERROR ONLY: Print only when an error occurs during
sendi n g.
OUTPUT NO: Turn off the activity report feature.
When you set TX REPORT to OUTPUT YES or PRINT ERROR
ONLY, you can add to the TX report half of the first page of
the document that was being sent. This can help remind you
which document was being sent. Valid only for memory
sendi n g.
Enable/disable automatic printing of the reception report.
OUTPUT YES: Set the fax to print an activity report every
time you receive a document.
PRINT ERROR ONLY: Print only when an error occurs during
receiving.
OUTPUT NO: Turn off the activity report feature.
Enable/disable automatic printing of the activity report.
When you set ON, your fax is set to print an activity report
for every 20 transactions (sending and receiving).
Description
Enable/disable error correction during transmission.
Set the length of the pause you insert into a dialling
sequence.
Determine whether the fax will redial a number if it fails to
get a response on the first attempt.
Set the number of retries.
Set the period of time between redialling attempts.
Enable/disable automatic scanning of documents after the
fax number is entered.
When you set ON, scanning begins automatically 5 seconds
after you enter the fax number.
Settings
OUTPUT NO/
PRINT ERROR ONLY
OUTPUT YES
ON/OFF
OUTPUT NO /
PRI N T ERROR ONLY/
OUTPUT YES
ON/OFF
(Factory settings are shown in
Settings
ON/OFF
2 seconds ( 1 to 15)
ON/OFF
2 ti m es ( 1 to 10)
2 mi n utes ( 1 to 99)
ON/OFF
(Factory settings are shown in
/
–
bold type.)
*
**
***
bold type.)
Advertisement
Table of Contents
