Setting The Recording Time For A Telephone Message - Canon B115 User Manual

Setting the recording time for a telephone
message _________________________________
1
Press [Function].
D
Press [Start/Copy].
2
Use [3] or [4] to select TAM SETTINGS.
D
Press [Start/Copy] twice.
3
Use [3] or [4] to select the recording time.
The recording time can be set to 0, 30, 60 or 120 seconds.
D
Press [Start/Copy].
4
Press [Stop].
Setting ends and the fax returns to standby mode.
When the recording time is set to 0, the alternative outgoing message is played. If an alternative
outgoing message has not been recorded, the outgoing message is played. In this case, there will be
Note
no beep after the message is played and the caller will not be able to leave a message.
Setting TAM MODE
U S E R S E T T I N G S
3 0 S E C O N D S
7-3
7