Setting The Recording Time For A Telephone Message - Canon FAXPHONE B95 User Manual

Setting the recording time for a telephone
message ________________________________________
1 Press [Function].
Press [Start/Copy].
USER SETTINGS
Use [ ] or [ ] to select TAM SETTINGS.
2
Press [Start/Copy] twice.
30 SECONDS
Use [ ] or [ ] to select the recording time.
3
The recording time can be set to 0, 30, 60 or 120 seconds.
Press [Start/Copy].
4 Press [Stop].
Setting ends and the fax returns to standby mode.
When the recording time is set to 0, the alternative outgoing message is played. If an alternative
outgoing message has not been recorded, the outgoing message is played. In this case, there will
be no beep after the message is played and the caller will not be able to leave a message.
7
7-3