Presetting The Spectrum Analyzer; Creating A User Preset - Agilent Technologies E4440A Getting Started Manual

Making a Basic Measurement

Presetting the Spectrum Analyzer

Presetting the Spectrum Analyzer
Preset provides a known starting point for making measurements. The analyzer has
three types of preset:
Restores the analyzer to its factory-defined state.
Factory Preset
Restores the analyzer to a user-defined state.
User Preset
This type of preset restores the currently selected mode to a known
Mode Preset
state.
For details, see the User's/Programmer's manual.
When is set to
Preset Type
preset. When
Preset Type
, , and
Preset User Preset
If is set to
Preset Type
factory preset.

Creating a User Preset

If you constantly use settings which are not the factory defaults, use the following steps
to create a user-defined preset:
1. Set analyzer parameters as desired.
2. Press ,
System Power On/Preset
user preset state.
3. Press to select
Preset
option.
Disabling User Preset
Go to the Power On/Preset menu (press
of or .
Factory Mode
36
, pressing the green
Factory
is set to , pressing
User
(if applicable); you then select the preset you want.
Mode Preset
, but a personality is not installed, pressing
Mode
,
Save User Preset
in the same softkey menu to enable user preset as an
User
System
key triggers a factory
Preset
displays the softkeys
Preset
to set the current parameters as the
, ) and select a
Power On/Preset
Factory
triggers a
Preset
Preset Type
Chapter 3