Agilent Technologies E4440A Getting Started Manual page 28

Front and Rear Panel Features
Rear-Panel Features
Item
# Name
11
KYBD
12
Line power
input
13
GPIB
14
LAN
15
TRIGGER 2 OUT
16
PARALLEL
17
70 MHZ IF OUT
18
MONITOR
19
RS-232
20
HNQ IN
H7L IN
H70 IN
28
Enables connection of an external PS-2 keyboard using a 6-pin mini-DIN connector.
Always turn off power before plugging in keyboard.
This feature not fully implemented. Currently used only for firmware upgrades.
The AC power connection. Also see "Power Requirements" on page 5.
Allows the connection of a General Purpose Interface Bus (GPIB, IEEE 488.1) cable,
which enables remote analyzer operation.
A TCP/IP Interface.
Also see "Turning on the Analyzer for the First Time" on page 11 for information on
setting the IP address.
For information on using the analyzer remotely, refer to the User's and
Programmer's Reference.
A trigger output used to synchronize other test equipment with the analyzer.
Reserved for future applications.
Supports remote printing (Printing is supported only from the parallel port).
Provides 70 MHz IF output.
Allows connection of an external VGA monitor.
Allows connection of a PC, printer, or modem.
This feature not fully implemented; to be implemented in a future release.
These features are only available when special options are installed.
Description
Chapter 2