Ricoh 3045 Facsimile Reference Manual page 786

Windows Configuration
I
In the [Printer URL] box, enter "http://(printer's address)/printer"as the print-
er's address.
If the server authentification is issued, to enable SSL (a protocol for encrypted
communication), enter "https://(printer's address)/printer" (Internet Ex-
1
plorer 5.01, or a higher version must be installed).
(example IP address: 192.168.15.16)
http://192.168.15.16/printer
https://192.168.15.16/printer
You can enter "http://printer's address/ipp" as the printer's address.
J
Enter a name for identifying the printer in [IPP Port Name]. Use a name dif-
ferent from the one of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box be-
comes the IPP port name.
K
Click [Detailed Settings] to make necessary settings.
For information about the settings, see DeskTop Binder-SmartDeviceMonitor
for Client Help.
L
Click [OK].
M
Click [Close] to close the [Printer Port] dialog box.
N
Click [Next >].
O
Check that the name of the machine whose driver you want to install is se-
lected, and then click [Next >].
P
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
Q
Specify whether or not to share the printer, and then click [Next >].
R
Specify whether or not to print a test page, and then click [Finish].
The printer driver installation starts.
S
Restart the computer to complete installation if necessary.
Note
❒ A user code can be set after the printer driver installation. For information
about user code, see the printer driver Help.
❒ Auto Run may not work with certain operating system settings. In that
case, launch "Setup.exe" on the CD-ROM root directory.
14