Ricoh 3045 Facsimile Reference Manual page 330

A
Open the bypass tray.
B
Adjust the paper guides to the paper size.
If the paper guides are not flush against the paper, skewing and misfeeds
might occur.
1. Extender
2. Paper Guide
C
Gently insert paper facing down into the bypass tray until the beeper
sounds.
Fan the paper to get air between the sheets to avoid a multi-sheet feed.
D
Select the paper size.
Note
❒ Open out the extender to support paper sizes larger than A4 L, 8
❒ When setting an OHP transparency, make sure that its front and back sides
are properly positioned.
Reference
For printer driver settings, see the printer driver Help.
Select paper type when printing onto OHP transparencies or thick paper
(over 127.9 g/m
parencies Using the Control Panel".
10
AJL006S
AJL007S
2
). For details, see p.13 "Setting Thick Paper or OHP Trans-
×11 L.
1
/
2