Ricoh 3045 Facsimile Reference Manual page 726

Monitoring and Configuring the Printer
Cover Open: Right Cover
Cover Open: Upper Right Cover
Data Size Error
Empty: Black Toner
Energy Saver Mode
2
Error
Error: Address Book
Error: Command Transmission
Error: DIMM Value
Error: Ethernet Board
Error: HDD Board
Error: Media Link Board
Error: Memory Switch
Error: Optional Font
Error: Optional RAM
Error: Parallel I/F Board
Error: PDL
Error: Rem. Certificate Renewal
Error: USB Board
Error: USB Interface
Error: Wireless Card
Error: Wireless Card or Board
Exceed Booklet Stapling Limit
Full: Finisher
Full: Finisher Booklet Tray
Full: Finisher Shift Tray
Full: Finisher Shift Tray 1, 2
Full: Finisher Tray
Full: Finisher Upper Tray
Full: Hole Punch Receptacle
Full: Internal Shift Tray
Full: Internal Tray 1
88
Messages Description
The right cover is open.
The upper right cover is open.
The data size error occurred.
The black toner cartridge is almost empty.
The machine is in Energy Saver Mode.
An error has occurred.
An error has occurred in the data of the address book.
An error has occurred in the machine.
A memory error occurred.
An Ethernet board error has occurred.
A hard disk drive board error has occurred.
An error has occurred on the media link board.
A memory switch error has occurred.
An error has occurred in the font file of the machine.
An error has occurred in the optional memory unit.
An error has occurred in the parallel interface.
An error has occurred in the page description lan-
guage.
An error has occurred in the remote sever renewal.
An error has occurred in the USB interface board.
An error has occurred in the USB interface.
Wireless card is not inserted during start up, or the
IEEE 802.11b interface unit or the wireless card is tak-
en out after start up .
An error has occurred in the IEEE802.11b interface
unit.
The printing has exceeded the stapling limit of the
booklet finisher.
Finisher tray is full.
Booklet tray of Finisher is full.
Shift tray of Finisher is full.
The shift tray 1 and 2 of Finisher are full.
Finisher Tray is full.
Finisher's upper tray is full.
Punch Chip receptacle for hole punch is full.
The internal shift tray is full.
Internal tray 1 is full.