Qr-Coded Parameter Menu - Denso AT27Q-SB User Manual

12.2 QR-coded Parameter Menu

To set the parameters, simply scan the QR codes below. Scanning "Start setting" QR Code symbol and "End
setting" QR Code symbol is not required.
Easy connection setup
To set the connection corresponding to the connected device, simply scan the QR Codes below.
(Connected device should be equipped with Bluetooth® module that is compatible with Bluetooth®
Specification Ver. 2.1+EDR.)
Windows PC
(SPP,HID Profile with PINCODE)
Android
(HID Profile)
The beeper volume can be set by scanning the following QR Code symbol only. No "Start setting" or "End
setting" QR Code symbol required to be scanned.
Adjusting the beeper volume
Scanning this QR Code symbol cycles the beeper volume through High, Medium and Low. The factory default is
High.
iOS(iPhone , iPad)
(HID Profile)
Beeper volume
92
Windows PC
(SPP,HID Profile without
PINCODE)
Android
(SPP Profile)