Table of Contents
Advertisement
EAN-8 with add-on
A code ID mark precedes add-on code data under the conditions "Code ID mark: Type 4" and "Code ID mark output
mode: Separating." (For details about the code ID mark, refer to (5) Code ID mark on pages 42 to 46.)
The conversion to the GTIN format is selectable. For the GTIN format conversion, refer to Section 8.3.
When the conversion to the GTIN format is disabled, the following formats apply.
With 2-digit add-on:
P
P
X
X
X
X
C/D X
P
1
2
3
1
2
3
4
With 5-digit add-on:
P
P
P
X
X
X
X
C/D X
1
2
3
1
2
3
4
P
: Prefix characters
n
X
: Add-on code data
5-9
Code 39
Code data read will be transmitted as is.
You can select whether or not to transmit start and stop codes ("*").
Interleaved 2of5, Standard 2of5
The scanner transmits code data read, starting from the character following the start code to the one preceding the stop
code. No start/stop codes will be transmitted.
Codabar (NW-7)
The scanner transmits code data read including the start/stop codes. You can select whether or not to transmit
start/stop codes.
Code 128 (GS1-128 (EAN-128))
The scanner transmits code data read, starting from the character following the start code to the one preceding the
check digit. Start/stop codes, FNC codes, or check digit will not be transmitted. Note that FNC1 placed in character
positions other than the 1st and 2nd ones from the start code will be converted to GS (1Dh) and transferred.
The conversion to the GTIN format is also selectable. For the GTIN format conversion, refer to Section 8.3.
Code 93
The scanner transmits code data read, excluding start and stop codes and a check digit.
X
5
6
X
X
X
X
5
6
7
8
9
54
Advertisement
Table of Contents
