Components Required - Denso AT27Q-SB User Manual

Components Required

The scanner (AT27Q-SB) requires the following components that differ depending upon whether the communications
adapter is used and which interface is selected.
 When using the communications adapter (BA11/10-RKU)
Basic components
The table below lists the basic components required for the use of the communications adapter.
(1) Scanner
(2) Communications adapter
(3) Charger
(4) AC adapter
Components required for individual interfaces
 For RS-232C interface
(5) RS-232C interface cable
(6) AC adapter
 For RS-232C interface and communications adapter mounted in the charger
(5) RS-232C interface cable,
Charger built-in type
 For USB keyboard or USB-COM interface
(5) USB interface cable

 When directly communicating with Bluetooth-enabled equipment
(no BA11/10-RKU communications adapter is used)
(1) Scanner
(2) Charger
(3) AC adapter
Scanner
(AT27Q-SB)
Charger
(CH-AT10L)
AT27Q-SB
BA11/10-RKU
CH-AT10L
AD2-1005/3000
CBBA-RS2000/9
AD2-1005/3000
CBBA-RS2000/9-1
CBBA-US2000/4
AT27Q-SB
CH-AT10L
AD2-1005/3000

Bluetooth
interface Communications
adapter
(BA11/10-RKU)

Bluetooth
interface

Bluetooth -enabled
computer
AC adapter
(AD2-1005/3000)

USB keyboard interface

USB-COM keyboard interface

RS-232C keyboard interface
vii
For charger
For communications adapter
For charger
Host computer