Denso AT27Q-SB User Manual page 97

Code 128, GS1-128 (EAN-128)
Items
Reading Code 128
Reading GS1-128 (EAN-128)
Minimum number of readable digits
for Code 128
Maximum number of readable digits
for Code 128
Transmission of FNC1 for Code 128
Minimum number of readable digits
for GS1-128 (EAN-128)
Maximum number of readable digits
for GS1-128 (EAN-128)
Transmission of FNC1 for GS1-128
(EAN-128)
(Note 1) The setting ranges are different from the numbers of digits that the scanner can actually read.
(Note 2) Using the QR-coded parameter menu enables or disables scanning of both Code 128 and GS1-128 (EAN-128) at
the same time.
Code 93
Items
Reading Code 93
Minimum number of readable digits
for Code 93
Maximum number of readable digits
for Code 93
(Note 1) The setting ranges are different from the numbers of digits that the scanner can actually read.
Parameters
Enable
Disable
Enable
Disable
1 to 99 digits
(excluding start/stop codes and
1-digit check digit)
Disable
Transmit GS
User-defined
1 to 99 digits
(excluding start/stop codes and
1-digit check digit)
Disable
Transmit GS
User-defined
Parameters
Enable
Disable
1 to 99 digits
(excluding start/stop codes and 2-digit
check digits)
: Can be changed only with the configuration software.
84
Defaults Refer to:

Section 12.2
(See Note 2.)

1 digit
(See Note 1.)
99 digits

Section 12.2
1 digit
(See Note 1.)
99 digits

Section 12.2
Defaults Refer to:
Section 12.2

1 digit
(See Note 1.)
99 digits