Netware Parameter Combinations - Axis 5500 User Manual

The Parameter List

NetWare Parameter Combinations

NETW_ENB
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
Functionality
Notes:
118
When NetWare is enabled (i.e. when the NETW_ENB. parameter is set to "yes"
in the NetWare Menu), the different settings of the
NETW_TRANSPORT_PROTOCOL. and NDPS. parameters will result in these
functionalities:
NETW_TRANSPORT_PROTOCOL
DUAL_STACK
DUAL_STACK
DUAL_STACK
DUAL_STACK
IP_ONLY
IP_ONLY
IP_ONLY
IP_ONLY
IPX_ONLY
IPX_ONLY
IPX_ONLY
IPX_ONLY
1. Raw TCP ports 9100 = LPT1 and 9101 = USB1 are opened for NDPS printing.
To create TCP NDPS printer objects, AXIS_PRINT_SYSTEM must be enabled (see
Note a).
2. The HP-MIB is enabled.
3. Services are SAP'ed and enabled on SPX sockets 8060 and 4114 (see Notes b
and c).
4. Print services are SAP'ed and enabled on SPX sockets, 400C = LPT1 and 401C
= USB1 (see Notes b and c).
5. Pure IP queue mode printing is enabled.
6. IPX queue mode printing is enabled (see Note c).
7. Looking for SAP NetwWare fileservers on the net (see Note c).
(a) TCP printing must be enabled (TCP_ENB. = YES).
(b) Some other SAP service must be present on the network.
(c) At least one frametype must be enabled for NetWare.
NDPS Functionality
TCP_AND_SPX 1, 2, 3, 4, 5, 6, 7
TCP_ONLY 1, 2, 3, 5, 6, 7
SPX_ONLY 2, 3, 4, 5, 6, 7
DISABLED 3, 5, 6, 7
TCP_AND_SPX 1, 2, 5
TCP_ONLY 1, 2, 5
SPX_ONLY 2, 5
DISABLED 5
TCP_AND_SPX 2, 3, 4, 6, 7
TCP_ONLY 2, 3, 6, 7
SPX_ONLY 2, 3, 4, 6, 7
DISABLED 3, 6, 7
AXIS 5500 / AXIS 5550 User's Manual