Flash Loading Of Firmware Over The Web - Axis 5500 User Manual

Configuration Possibilities
Important:
Changing Language
and Character Set

Flash Loading of Firmware over the Web

92
Check that the SMTP_SERVER. and DOMAIN_NAME. parameters in the
print server's internal Web pages are correct. These parameters are set in
Admin | Network Settings | Detailed View | TCP/IP
You can change the language and character set used for the print server's Web
interface from the User mode:
1. Click the Change button next to 'Language'.
2. Choose your preferred language and character set from the drop-down lists,
cllick OK and then press F5 to refresh the view.
The firmware can easily be upgraded, since flash loading over the Web is
possible from the print server's internal Web pages. Client software is not
needed to upgrade the firmware. See Upgrading from the Print Server's Internal
Web Pages, on page 100.
AXIS 5500 / AXIS 5550 User's Manual