Axis 5500 User Manual page 20

Basic Installation
Note:
Set the IP Address
using ARP in
UNIX/Linux and Mac
OS X
Notes:
20
The host will return
reply from 192.168.3.191
indicates that the address has been set and that communication is established.
Log in to the print server's Web pages (see Using a Web Browser for Print Server
Management, on page 58), select Admin | Network Settings | Detailed View |
TCP/IP and define Default Router and Subnet Mask.
You have now set the IP address of the print server. Continue to "Adding a
Network Printer to your Computer" on page 22.
• When you execute the ping command for the first time, you will experience a significantly
longer response time than is usual
• The ability to set the IP address with ARP and PING will only be enabled the first 4 minutes
after restarting the print server.
• By using the arp -d command, the static entry in the arp table is removed from the
host's cache memory.
1. Open a Terminal and enter the following commands:
Syntax
1. arp -s <IP address> <Ethernet address>
2. ping <IP address>
3. arp -d <IP address>
The host will return
psname is alive
the address has been set and that communication is established. Log in to the
print server's Web pages (see Using a Web Browser for Print Server
Management, on page 58), select Admin | Network Settings | Detailed View |
TCP/IP and define Default Router and Subnet Mask.
You have now successfully set the IP address of the print server. Continue to
"Adding a Network Printer to your Computer" on page 22.
• If the host name has not been mapped to an IP address, simply replace the host name entry
with the IP address.
• The ARP command varies between different UNIX/Linux systems. Some BSD type systems
expect the host name and node address in reverse order. Furthermore IBM AIX systems will
require the additional argument ether.
• When you execute the ping command for the first time, you may experience a
significantly longer response time than is usual
• The ability to set the IP address with ARP and PING will only be enabled the first 4 minutes
after restarting the print server
, or a similar message. This
.
Example
arp -s 192.168.3.191 00:40:8c:10:00:86
ping 192.168.3.191
arp -d 192.168.3.191
, or a similar message. This indicates that
.
AXIS 5500 / AXIS 5550 User's Manual