Netware Parameter Combinations - Axis 5570e User Manual

NetWare Parameter Combinations

Functionality
Notes:
AXIS 5570e / AXIS 5670e User's Manual
In AXIS 5570e, when NetWare is enabled (i.e. when the NETW_ENB.
parameter is set to "yes" in the NetWare Menu), the different settings of
the NETW_TRANSPORT_PROTOCOL. and NDPS. parameters will result in
these functionalities:
NETW_ENB NETW_TRANSPORT_PROTOCOL
YES DUAL_STACK
YES DUAL_STACK
YES DUAL_STACK
YES DUAL_STACK
YES IP_ONLY
YES IP_ONLY
YES IP_ONLY
YES IP_ONLY
YES IPX_ONLY
YES IPX_ONLY
YES IPX_ONLY
YES IPX_ONLY
1. Raw TCP ports 9100 = LPT1 and 9101 = USB1 are opened for NDPS
printing. To create TCP NDPS printer objects, AXIS_PRINT_SYSTEM must
be enabled (see Note a).
2. The HP-MIB is enabled.
3. Services are SAP'ed and enabled on SPX sockets 8060 and 4114 (see
Notes b and c).
4. Print services are SAP'ed and enabled on SPX sockets, 400C = LPT1
and 401C = USB1 (see Notes b and c).
5. Pure IP queue mode printing is enabled.
6. IPX queue mode printing is enabled (see Note c).
7. Looking for SAP NetwWare fileservers on the net (see Note c).
(a) TCP printing must be enabled (TCP_ENB. = YES).
(b) Some other SAP service must be present on the network.
(c) At least one frametype must be enabled for NetWare.
The Parameter List
NDPS Functionality
TCP_AND_SPX 1, 2, 3, 4, 5, 6, 7
TCP_ONLY 1, 2, 3, 5, 6, 7
SPX_ONLY 2, 3, 4, 5, 6, 7
DISABLED 3, 5, 6, 7
TCP_AND_SPX 1, 2, 5
TCP_ONLY 1, 2, 5
SPX_ONLY 2, 5
DISABLED 5
TCP_AND_SPX 2, 3, 4, 6, 7
TCP_ONLY 2, 3, 6, 7
SPX_ONLY 2, 3, 4, 6, 7
DISABLED 3, 6, 7
275